Home ProductsFoam Sealing Machine

Polyurethane Foam sealing machine

Polyurethane Foam sealing machine

Polyurethane Foam sealing machine

Product Details:

Place of Origin: CHINA
Certification: ISO9001,SGS
Model Number: INTC-20

Payment & Shipping Terms:

Minimum Order Quantity: 1 SET
Price: Negotiated
Packaging Details: Export standard packing
Delivery Time: Normal 45 days
Payment Terms: TT/LC,negotiated
Supply Ability: 30 SETS/MONTH
Contact Now
Detailed Product Description
Related Industry: Cabinets,lighting,automobile And Other Sealing Fields

Detailed Product Description 

1. Summarization

Standard Polyurethane Shaping machine is built by 1 Low pressure pouring system and 1 Numerical Control Worktable.

Standard system consists of one POLY barrel and one ISO barrel, and the two metering units are driven by two independence motors, through change variable high- pressure displacement of the metering pump’s flow out to control the metering pump’s output. 

Such machine is very suitable for making filters and pouring Polyurethane to electric panel door to prevents the dust from going inside.

2. Main parameters and descriptions for the equipment

2.1 Machine type and Model No.: Two components dosing type / INTC-20 compact model


Polyurethane Foam sealing machine

2.2 Suitable foaming system: flexible foam, half-rigid foam
2.3 Suitable material viscosity (when material temp of 22℃): 
Polyol :  max. 30,000 mPas
Isocyanate: max. 1,000 mPas
2.4 Pouring output (when mixing ratio of 2:1) : 0.5-6 g/sec, with ratio range adjustable 20:1~1:1
2.5 Sample pouring program time: 0.01~9.99sec (accurate to 0.01s)
2.6 Metering unit:
Measurement accuracy≤0.5%
Component material A B
Quantity 1 1
Metering pump type K1.2BG (1.2CC) K0.6BG (0.6CC)
Power of motor(KW) 0.75 0.75
Speed of motor(RPM) 20-130 20-130
Pump-shaft sealing lubrication DOP DOP

2.7 Working pressure limit and control system

All the parts such as Shift motor,Gear metering pump, Bracket,Coupling is using to metering the components’ flow out.

Both polyol and isocyanate side working pressure are allowed in a range of 0~40 bar. Whenever the working pressure exceeds the range, the machine will be stopped automatically and give an alarm at the same time.

2.8 Components' flow output control and testing units
Bases on the pump’s flow out and the components’ mixing requirement and related parameters; the flow out of the single component is controlled by adjusting the running speed of the motor, mating with the feeding valve to pour the material into the container separately, then measure the quantity of raw material and inspect,modify the parameter of flow out and mixing ratio, so as to realize the adjustment and control of the components’ flow out. 
2.9 Component filter
Two component furnished with clean line crack type filter since separately, which are setted between the metering pumps and the material tanks. Filter precision is accurate to 330¦Ìm. Rotate the axle of the filter and fixed blow down regularly.
2.10 Mixing head   
Materials spout to the mixing chamber by needle linking valve, and the outlet is nicety and no block.
---- Using Servo motor to drive the agitator mixing mechanical.
The motor and the agitator are using belt transmissions, the speed is adjusted by change the motor running speed though the HMI.
---- On testing status, the motor and the shaft do not run.
---- The stirring’s advance and lag time are controlled by the electric system, two modes of  “Automatic” and  “Manual “ for options.
---- Open or Close of valves is controlled by the pneumatic cylinder.
---- The mixing head,mixing chamber and the awl shaped nozzle are convenient to take down.
---- The needle shaped regulating valves can adjust the the pressure balance of the each component .
---- Nozzle- lock system can ensure the high precision of material feeding, the bonding area is closely sealed. (Apply for the technology patent).
2.11 Machine frame
Machine frame
Using for fixing the tank,metering pump,pipe,control system.
2.12 Mixing head cleaning system
The mixing head cleaning system contains one 20L stainless steel barrel, with level meter, safety valve and some instruments.
---- Process of washing and blowing are controlled by Electric Valve.
---- Compressed air is used to blow out the leftover in the mixing head and to dry the impregnant.
---- The time of Blowing and Washing is controlled by PLC, the parameter is setted though  the HMI directly.
---- Blowing and Washing can be controlled by program or manual.
---- Exhaust is operated by manual.
---- The pipeline of blowing and washing are constituted by the menstruum of high pressure  pipe.
---- The setted pressure of blowing and washing is 0.15Mpa.
---- Stirring axis is synchronously moving when washing. 
---- When washing the shaft is running synchrony.
---- With MC outside the pot.
2.13 Polyol Tank : 1 PC
---- Effective volume: 20 liters; 
---- Intermediate layer type, the floor SU304 stainless steel material inside; 
---- The max working pressure: 0. 60MPa; 
---- One heated cover safety valve, setted working pressure as 0. 25MPa; One relief pressure valve with manometer, setted the working pressure as  0.05~0.45MPa,which control the max intake pressure of compressed air into the material tank.
---- Automatic filling mouth install non-return valve; 
---- Export the mouth and install two manual stop valves through the three direct links ( the stop valve of the bypass is used in blow down among them); 
---- With temperature sensor
---- The max.operating temperature allows to 100℃;
---- With stirring axis, power 0.12KW, rotational speed 51rpm; Attached with mechanical sealed device, which ensures tight of foaming technology requirement.
---- With heat preservation outside.
---- Marked with “POLY" or "A".
2.14 ISO Tank :  1 PC
---- Effective volume: 20 liters; 
---- Intermediate layer type, the floor SU304 stainless steel material inside; 
---- The greatest working pressure: 0. 60MPa; 
---- One heated cover safety valve,setted working pressure as 0. 25MPa; 
---- One relief pressure valve with manometer, setted the working pressure as 0.05~0.45MPa, which  control the max intake pressure of compressed air into the material tank.
---- Automatic filling mouth install non-return valve; 
---- Export the mouth and install two manual stop valves through the three direct links  (the stop valve of the bypass is used in blow down among them );  
---- With temperature sensor  
The max.operating temperature allows to 100℃;
----With heated preservation outside.
----Marked with “B” or "ISO"

Polyurethane Foam sealing machine


2.15 Temperature control unit
Heating: 2*0.5 Kw
Two heating units control the heating of two barrels separately, by the cooling unit to reach the technics requirement of controlling the foaming material’s temperature automatically. Polyurethane Foam sealing machine
2.16 Piping system
Including soft tubes for to delivery material, feeding tubes fixing on the mixing head, material return tubes connect with material tanks.
---- POLY component adopts polyurethane soft tubes.
---- ISO component adopts wire reinforced teflon high pressure tubes.
---- The tubes for delivery compressed air and washing solution are solvent resistance high pressure tubes .

Polyurethane Foam sealing machine


2.17 Numerical robot technology parameters
---- Max sliding speed: 20m/min
---- Max accelerated speed: 4m/s2
---- Resetting precision: ±0.05 mm
---- Worktable’s moving area:2500 mm×1200 mm×200 mm(X×Y×Z).  
     Can be adjusted according to customers’ requirement.
---- Size of linear robot:3600mm * 2000mm * 1900mm
2.18 Pneumatic system
Consist of micron degree filter release valve, oil mist, pressure sensor and valves  block... so as to control the pneumatic load and unload. 

Polyurethane Foam sealing machine


2.19 Electrical control system

Using PLC to control the electrical system, convenience to operate. The main parts are imported abroad, so tomake sure the control system’s safety.
---- English/Chinese language options 
---- Easy operate and visual view, the menus can be interactive programming though soft buttons,function buttons and toch screen interface.
---- The display and operation of injection system are completed though the same touch screen interface.
---- Multi-functional operation mode.
---- Receipt memory and password protection function.
---- SRS232 interface for program download.
---- Powerful HMI functions, it can set the status of raw material feeding, stirring, washing, display and control the pressure of components, the alarm of pressure less or more and the overpressure of pump, display and control the values of temperature...etc...
The strong alarm function can stop operation if it is urgent.
The electric cabinet including:
---- Computer program controller
---- Relays
---- Contactors
---- Switches, buttons, wirings
---- External Interface
---- Soft ware of PLC program
2.20 Installation terms:
---- Vacuum pump:   40m3/h
---- Compressed air:  Dry air 5~7 bars when flow with 150L/min
---- Control voltage: 220V/24
---- Relay voltage : 24 V
---- Input frenquency: 8KVA ( approx) 
---- Average consumption : 4KVA ( approx ) 
---- Power: 3*380V – 50 Hz (3P+N+T) or according to customers' local standard
---- Installation enviroment:  No install in the workshop of any explosion
---- Best working temperature: 18℃ to 28℃


                                                  Part II PRICE ,PAYMENT, DELIVERYAND OTHERS


PRICE: Negotiated

Payments terms: by divided payments of

                30% T/T down payment and

                70% before delivery

       Or 100% irrevocable and confirmed L/C at sight, payable against shipping documents.

Delivery time: .60 days upon down payment or L/C

Validity time: 2 months

Period of validity of the price above: 60 days since the offer date.

Other terms
A. The seller will dispatch 1- 2 engineers to the buyer's factory for the installation and commissioning and  training, the buyer should be responsible for the cost of visa, flight tickets, the room and local area transporation, and allowance allowance USD60/day for each person of the engineer. 
The customer has to supply skilled workers (mechanical fitters as well as electricians) in a sufficient number.
Standard documentation (English version) in complete, consisting of:
* Plant installation drawing showing the interfaces of the supplied equipment with connections furnished by the customer, establishing their sittings.
* Flow diagram giving nominal pipe diameters of the machine
* El-CAD established electrical diagrams
* Assembly drawings of the most important plant components, showing general layout characteristics such as  main dimensions and operating data.
* Operating, maintenance and repair instructions
* The client shall prepare the air compressor on his own and decide whether to equip an air-freezing dryer or a water chiller.
* Any possibly existing plant or equipment that could obstruct access to the site must be removed.
* The customer supplies the raw materials and makes available all auxiliary mediums required for running the plant as required.
D Warranty for machinery: 12 months.








Contact Details

Contact Person: Ms. Susanna

Send your inquiry directly to us (0 / 3000)